Menu
Your life will take place great changes after obtaining the HPE7-A06 certificate. Many companies like to employ versatile and comprehensive talents. What you have learnt on our HPE7-A06 preparation prep will meet their requirements. So you will finally stand out from a group of candidates and get the desirable job. At the same time, what you have learned from our HPE7-A06 Exam Questions are the latest information in the field, so that you can obtain more skills to enhance your capacity.
we will provide you with the best HP HPE7-A06 exam dumps. You can pass the HP HPE7-A06 exam with high marks with the help of the HP HPE7-A06 exam questions. These HP HPE7-A06 exam practice questions are designed and verified by experienced and qualified HPE7-A06 Exam Preparation trainers. They work together and put all their expertise and knowledge while verifying HPE7-A06 exam questions all the time.
>> Unlimited HPE7-A06 Exam Practice <<
Our HPE7-A06 test guide has become more and more popular in the world. Of course, if you decide to buy our HPE7-A06 latest question, we can make sure that it will be very easy for you to pass your exam and get the certification in a short time, first, you just need 5-10 minutes can receive HPE7-A06 Exam Torrent that you can learn and practice it. Then you just need 20-30 hours to practice our study materials that you can attend your exam. It is really spend your little time and energy.
NEW QUESTION # 61
Which tables arc synchronized between a pair ofCX 8325 switches in a VSX cluster? (Select two.)
Answer: A,C
Explanation:
The question asks which tables are synchronized between a pair of CX 8325 switches in a Virtual Switching Extension (VSX) cluster. VSX is a high-availability solution that synchronizes specific tables to ensure consistent operation across both switches.
* Analysis of Options:
* A. BGP Neighbors:BGP neighbor tables are not synchronized in VSX; each switch maintains its own BGP sessions.
* B. MAC address:Correct. VSX synchronizes the MAC address table to ensure consistent Layer
2 forwarding across both switches.
* C. Spanning-Tree Protocol (STP):STP states are not synchronized; each switch runs its own STP instance, though they coordinate to avoid loops.
* D. IP Routing:Correct. VSX synchronizes the IP routing table to ensure consistent Layer 3 forwarding.
* E. Link Layer Discovery Protocol (LLDP):LLDP information is not synchronized; each switch maintains its own neighbor information.
* Why B and D are Correct:In a VSX cluster, the MAC address table and IP routing table are synchronized to ensure seamless Layer 2 and Layer 3 operations. This synchronization allowsboth switches to share a common view of the network, enabling features like active-active forwarding and hitless failover. The vsx-sync feature in AOS-CX ensures these tables are kept consistent across the VSX pair.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Involves designing and troubleshooting VSX for resiliency and redundancy.
* Switching (19%):Includes implementing and troubleshooting Layer 2 technologies like MAC address tables.
* Routing (16%):Covers IP routing table synchronization in VSX environments.
References:
HPE Aruba Networking AOS-CX Configuration Guide: VSX Configuration, detailing table synchronization.
HPE7-A06Study Guide: Covers VSX architecture and synchronization mechanisms.
HPE Aruba Networking Technical Documentation: VSX Overview, explaining MAC and routing table synchronization.
VSX (Virtual Switching Extension) synchronizes state information between the two switches in a cluster to enable active-active forwarding and provide a single logical view to downstream devices.
Analysis of Options:
A: BGP Neighbors: BGP sessions are typically established independently by each VSX member. While configurations can be synced, the dynamic state/neighbor table itself is not a core VSX synchronization item.
B: MAC address: The MAC address table is synchronized between VSX members. This is crucial for Layer 2 forwarding consistency and allowing either switch to forward traffic destined for a known MAC address learned via the VSX pair.
C: Spanning-Tree Protocol (STP): STP runs independently on each physical switch. VSX uses technologies like MC-LAG to provide loop-free active-active paths downstream, reducing reliance on STP blocking, but the STP state itself isn't synchronized via the ISL.
D: IP Routing: While the full IP routing table (RIB) is built independently on each switch via routing protocols, VSX Active Gateway synchronizes necessary Layer 3 information (like virtual gateway IP and MAC, and potentially ARP entries) to ensure consistent first-hop routing and failover. Some sources might broadly categorize ARP synchronization under L3/IP routing context in VSX. Given that the ARP table (essential for L3 forwarding consistency) is synchronized, and it's not listed separately, "IP Routing" might encompass this synchronization aspect.
E: Link Layer Discovery Protocol (LLDP): LLDP information relates to physically connected neighbors of each switch and is not synchronized across the VSX ISL.
Conclusion: The MAC address table (B) is definitively synchronized. The ARP table is also synchronized, which is fundamental for Layer 3 forwarding consistency provided by Active Gateway. As ARP is not explicitly listed, and "IP Routing" (D) is, D is the most likely second answer intended to cover the necessary L3 state synchronization (primarily ARP and Active Gateway state) performed by VSX.
References: AOS-CX VSX Guide (specifically sections on State Synchronization, ISL, Active Gateway), VSX Fundamentals documentation. This relates to "Network Resiliency and virtualization" (8%) and
"Switching" (19%) objectives.
NEW QUESTION # 62
A customer wants to deploy loT security devices that are PoE-powered. Dueto its criticality. it is required that those devices remain active even during a switch software upgrade. What is a valid solution to meet customer requirements?
Answer: D
Explanation:
The question involves a customer deploying PoE-powered IoT security devices (e.g., door locks) that must remain active during an AOS-CX switch software upgrade. The task is to identify a valid solution.
* Analysis of Options:
* Option A:Incorrect. A VSX pair provides redundancy but does not guarantee PoE continuity during a single switch's upgrade.
* Option B:Incorrect. quick-poe reduces PoE startup time but does not ensure power during upgrades.
* Option C:Correct. power-over-ethernet always-on ensures PoE remains active during software upgrades, meeting the requirement.
* Option D:Incorrect. PoE priority adjusts power allocation but does not guarantee continuity during upgrades.
* Why Option C is Correct:The power-over-ethernet always-on feature on AOS-CX switches ensures that PoE power delivery continues uninterrupted during software upgrades or reboots, critical for devices like IoT security door locks that require constant power. This feature prevents power cycling on PoE ports, maintaining device operation. For example, enabling it on relevant ports (e.g., interface 1/1/1 power-over-ethernet always-on) ensures compliance with the customer's requirement, as per HPE Aruba Networking's PoE high-availability guidelines.
* Relevance to Certification Objectives:
* Connectivity (9%):Configuring PoE for critical device deployment.
* Network Resiliency and Virtualization (8%):Ensuring device uptime during maintenance.
* Troubleshooting (10%):Resolving PoE continuity issues.
References:
HPE Aruba Networking AOS-CX Configuration Guide: PoE Always-On Feature.
HPE7-A06Study Guide: Covers PoE configuration for high-availability devices.
HPE Aruba Networking Technical Documentation: PoE Best Practices for IoT.
NEW QUESTION # 63
An administrator is monitoringthird-party WLAN transmitters m HPE Aruba Networking Central and some of them are classified as rogue and suspected rogue How aresuspected rogues classified when using the default classification method for the rule "Suspected AP On-Prem" in HPE Aruba Networking Central?
Answer: C
Explanation:
The question asks how suspected rogue APs are classified using the default classification method for the
"Suspected AP On-Prem" rule in HPE Aruba Networking Central.
* Analysis of Options:
* Option A:Correct. Suspected rogues are classified with a signal level of -65 dBm (indicating proximity) and WLAN classification of "On-Prem" (indicating they are on the premises).
* Option B:Incorrect. A signal level of -55 dBm is too strong, and "Interfering" is not specific to on-premises rogues.
* Option C:Incorrect. A signal level of -50 dBm is even stronger, and "Interfering" is incorrect.
* Option D:Incorrect. "On Wire" classification applies to wired rogue detection, not wireless on- premises APs.
* Why Option A is Correct:In HPE Aruba Networking Central, the "Suspected AP On-Prem" rule identifies rogue APs based on their signal strength and location. A signal level of -65 dBm indicates the AP is close enough to be on the premises, and the "On-Prem" classification confirms it's detected within the managed network's environment. This default rule helps identify potential security threats by flagging unauthorized APs with moderate to strong signals, distinguishing them from interfering or distant APs, as per Aruba's wireless security framework.
* Relevance to Certification Objectives:
* WLAN (9%):Designing and troubleshooting RF attributes and wireless security functions.
* Security (10%):Troubleshooting and identifying rogue APs in customer networks.
* Troubleshooting (10%):Analyzing wireless issues using Aruba Central tools.
References:
HPE Aruba Networking Central User Guide: Rogue AP Detection and Classification.
HPE7-A06Study Guide: Covers wireless security and rogue AP management.
HPE Aruba Networking Technical Documentation: Wireless Security and Rogue Detection Best Practices.
NEW QUESTION # 64
The customer is experiencing periodic uplink congestion between campus-1's AGG-1 and core. This has boon negativelyaffecting voice communications.The VOIP phones edge mark their packets with DSCP EF. The uplink from AGG-1 to core is LAG1.
The customer has already configured the following class and policy on AGG-1:
Based on this policy, which scrip), when deployed on AGG-1. will improve the reliable forwarding of voice trafficbetween AGG-1 and its uplink to the core?
Answer: C
Explanation:
The problem describes uplink congestion affecting VoIP traffic (marked with DSCP EF, value 46) on AGG-
1's LAG1 uplink. The existing configuration classifies this traffic into voip_class and applies voip_policy inbound, setting local-priority 6. To improve reliable forwarding during congestion, VoIP traffic needs strict priority queuing on the egress interface (LAG1).
* Analysis of Options:
* Option A applies a QoS schedule profile globally but doesn't modify the policy's local-priority or apply the schedule profile specifically to the congested LAG.
* Option B modifies voip_policy to set local-priority 7 (mapping DSCP 46 traffic to queue 7) and applies the 8qDwrStrict schedule profile to the egress interface lag 1. In the 8qDwrStrict profile, queue 7 is configured for strict priority, ensuring voice traffic gets precedence over lower-priority traffic during congestion. This aligns with best practices for QoS for VoIP.
* Option C also sets local-priority 7 and applies the schedule profile to lag 1, but the profile itself configures queue 7 with DWRR (Deficit Weighted Round Robin) instead of strict priority, which is less suitable for delay-sensitive voice traffic.
* Option D applies a schedule profile globally and uses DWRR for queue 7.
* Conclusion:Option B is the correct solution because it maps the DSCP EF traffic to the highest local priority (7) and applies a QoS schedule profile to the specific congested uplink (lag 1) that treats queue
7 with strict priority. This ensures voice traffic is prioritized reliably.
References:AOS-CX QoS Guide (specifically sections on Classification, Queuing, Scheduling Profiles, Strict Priority vs. DWRR, applying policies to interfaces/LAGs), DSCP to Queue mapping concepts. This relates to the "Performance Optimization" (6%) and "Connectivity" (9%) objectives.
NEW QUESTION # 65
When using the cable diagnostic feature on an AOS-CX switch to test a 1000BaseT connection, whatthe accuracy of 'distance to fault"?
Answer: D
Explanation:
The question asks about the accuracy of the 'distance to fault' measurement provided by the cable diagnostic feature (using Time Domain Reflectometry - TDR) on an AOS-CX switch for a 1000BaseT connection.
* TDR Accuracy:TDR works by sending a signal down the cable and measuring the time it takes for reflections to return, which indicates faults like opens or shorts. The accuracy depends on the quality of the TDR circuitry, the calibration,and the cable characteristics. Network equipment vendors typically specify the expected accuracy.
* AOS-CX Specification:According to HPE Aruba Networking documentation for AOS-CX switches, the accuracy of the TDR-based cable diagnostics for distance to fault on copper cabling is typically specified as +/- 1 meter.
* Analysis of Options:
* A: +/- 10m - Too inaccurate.
* B: +/- 2m - Less accurate than specified.
* C: +/- 6m - Too inaccurate.
* D: +/- 1m - Matches the documented accuracy for AOS-CX TDR.
References:AOS-CX Fundamentals Guide, AOS-CX CLI Reference Guide (under diag cable-diagnostic command description or general troubleshooting sections). This relates to the "Troubleshooting" (10%) objective.
NEW QUESTION # 66
......
The HP HPE7-A06 real questions are an advanced strategy to prepare you according to the test service. You can change the time and type of questions of the HP HPE7-A06 exam dumps. HPE7-A06 practice questions improve your confidence and ability to complete the exam timely. We ensure success on the first attempt if you use our HP HPE7-A06 Exam Dumps according to our instructions.
Technical HPE7-A06 Training: https://www.practicetorrent.com/HPE7-A06-practice-exam-torrent.html
HP Unlimited HPE7-A06 Exam Practice Microsoft certification is a high demand network certification in IT industrial area, So our HPE7-A06 practice materials have an affinity to customers with ambition like you, The moment you make a purchase for our HPE7-A06 exam dumps materials, you can immediately download them because our system will waste no time to send HP HPE7-A06 dumps guide materials to your mailbox as long as you have paid for them, And our experts are still putting their energy to its limits to achieve the perfect outcome of HPE7-A06 latest dumps.
Making this level of contrast possible, some portions of a filmed HPE7-A06 image can fall off into blackness where there is too little light to be visible relative to a scene's exposure.
I will buy another exam soon again, Microsoft certification is a high demand network certification in IT industrial area, So our HPE7-A06 practice materials have an affinity to customers with ambition like you.
The moment you make a purchase for our HPE7-A06 exam dumps materials, you can immediately download them because our system will waste no time to send HP HPE7-A06 dumps guide materials to your mailbox as long as you have paid for them.
And our experts are still putting their energy to its limits to achieve the perfect outcome of HPE7-A06 latest dumps, So, start your journey by today, get the PracticeTorrent HPE Campus Access Switching Expert Written Exam (HPE7-A06) study material, and study well.