Menu
As long as you study with our RCNI exam braindump, you can find that it is easy to study with the RCNI exam questions. Therefore, even ordinary examiners can master all the learning problems without difficulty. In addition, RCNI candidates can benefit themselves by using our test engine and get a lot of test questions like exercises and answers. They will help them modify the entire syllabus in a short time. The most important thing is that our RCNI Practice Guide can help you obtain the certification without difficulty.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> RCNI Test Certification Cost <<
There is no doubt that in the future information society, knowledge and skills will be a major driver for economic growth and one of the major contributors to the sustainable development of the information industry. And getting the related RUCKUS Certified Networking Implementer certification in your field will be the most powerful way for you to show your professional knowledge and skills. However, it is not easy for the majority of candidates to prepare for the exam in order to pass it, if you are one of the candidates who are worrying about the exam now, congratulations, there is a panacea for you--our RCNI Study Tool.
NEW QUESTION # 36
Which command can be used to identify Cyclic Redundancy Check (CRC) errors on port Ethernet 1/1/1?
Answer: B
Explanation:
* Locating CRC Errors:
* The show statistics ethernet [port] command provides detailed port statistics, including packet counts, errors, and specifically Cyclic Redundancy Check (CRC) errors.
* Why Other Commands Don't Work:
* B. show interfaces brief ethernet 1/1/1: This provides a summary of interface status but does not include detailed error information like CRC errors.
* C. show mac-address ethernet 1/1/1: This displays MAC address table entries for the specified port, unrelated to error statistics.
* D. show port security ethernet 1/1/1: This shows port security configurations and violations, not errors like CRC.
References:
* ICX Switch Command Reference: RUCKUS Documentation
NEW QUESTION # 37
Which switch model provides the most 100Gb ports?
Answer: D
NEW QUESTION # 38
Which function is performed by ARP protocol?
Answer: D
NEW QUESTION # 39
Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?
Answer: C
Explanation:
To configure RUCKUS ICX switch ports 1/1/1 and 1/1/2 as untagged members of VLAN 10, and port 1/2/1 as a tagged member of VLAN 10, follow these steps:
* Access the Switch's Command Line Interface (CLI):
* Use SSH or a direct console connection to access the switch's CLI.
* Enter Global Configuration Mode:
* At the prompt, enter:
bash
Copy code
enable
configure terminal
* Create or Select VLAN 10:
* Ensure VLAN 10 exists. If not, create it:
Copy code
vlan 10
* Assign Ports 1/1/1 and 1/1/2 as Untagged in VLAN 10:
* Within VLAN 10 configuration, assign the ports:
css
Copy code
untagged ethernet 1/1/1 to 1/1/2
* Assign Port 1/2/1 as Tagged in VLAN 10:
* Still within VLAN 10 configuration, assign the port:
Copy code
tagged ethernet 1/2/1
* Exit Configuration Mode and Save Changes:
* Exit to the previous mode:
bash
Copy code
exit
* Save the configuration to ensure changes persist after a reboot:
arduino
Copy code
write memory
* VLAN Configuration:
* The command vlan 10 selects VLAN 10 for configuration. If VLAN 10 does not exist, this command creates it.
* Untagged Ports:
* The command untagged ethernet 1/1/1 to 1/1/2 assigns ports 1/1/1 and 1/1/2 as untagged members of VLAN 10. Untagged ports are typically used for end devices that do not tag their own traffic.
* Tagged Ports:
* The command tagged ethernet 1/2/1 assigns port 1/2/1 as a tagged member of VLAN 10. Tagged ports are commonly used for trunk links between switches or other network devices that handle multiple VLANs.
* Command Syntax:
* The sequence of commands in option D correctly follows the RUCKUS ICX switch configuration syntax, ensuring that the ports are appropriately assigned to VLAN 10.
References:
* VLAN configuration on Ruckus ICX switches for Ruckus Wireless WLAN's
* ICX 7150 tag port VLAN1 - RUCKUS Community Forums
NEW QUESTION # 40
Which three objects can be assigned a Layer 3 address? (Choose three.)
Answer: B,E,F
Explanation:
* Layer 3 Address Assignment:
* Stack Interface (A): A stack interface is a virtual interface representing all members of a stack.
It can be assigned a Layer 3 IP address for management or routing purposes.
* Loopback (E): Loopback interfaces are virtual interfaces always "up" and used for routing, management, or stable endpoint addressing.
* GRE Tunnels (F): GRE tunnels operate at Layer 3 and require IP addresses for both endpoints to encapsulate and route traffic.
* Why Not Other Options?
* B. VxLAN: VxLAN operates at Layer 2 over Layer 3 and does not require direct IP address assignment to itself.
* C. Virtual LAN: VLANs are Layer 2 constructs; while they are associated with SVI (Switch Virtual Interfaces), they are not directly assigned an IP address.
* D. Virtual Ethernet: Virtual Ethernet interfaces are typically Layer 2 and used within virtualized environments, not directly assigned Layer 3 addresses.
References:
* ICX Routing Configuration Guide: RUCKUS Documentation
NEW QUESTION # 41
......
The RUCKUS RCNI certification exam offers a great opportunity for RUCKUS professionals to demonstrate their expertise and knowledge level. In return, they can become competitive and updated with the latest technologies and trends. To do this they just need to enroll in RUCKUS Certified Networking Implementer (RCNI) certification exam and have to put all efforts and resources to pass this challenging RCNI exam. You should also keep in mind that to get success in the RUCKUS RCNI exam is not an easy task.
Valid RCNI Vce Dumps: https://www.passsureexam.com/RCNI-pass4sure-exam-dumps.html